Imikhiqizo
Ukusebenza okuhle kakhulu kwezomnotho nezemvelo kopende wesakhiwo sensimbi koqweqwe lwawo
Upende we-Enamel
Ngaphambili
Reverse
Imingcele Yezobuchwepheshe
| Isiqalo | Koqweqwe lwawo oluphezulu lwe-Coating | I-varnish (ongakukhetha) | |
| Impahla | I-solvent | I-solvent | I-solvent |
| Ugqinsi lwefilimu elomile | 100μm-200μm/ungqimba | 150μm-250μm/ungqimba | 80μm-120μm/ungqimba |
| Ukusabalala kwetiyori | 0.15 kg/㎡ | 0.20 kg/㎡ | 0.10 kg/㎡ |
| Thinta ome | ＜2h (25℃) | ＜8h (25℃) | ＜2h (25℃) |
| Isikhathi sokumisa (kanzima) | Amahora angu-12 | Amahora angu-12 | Amahora angu-12 |
| Ivolumu eqinile % | 80 | 85 | 80 |
| Imikhawulo yohlelo lokusebenza Okuncane.Temp.Ubukhulu.RH% | (-10) ~ (80) | (-10) ~ (80) | (-10) ~ (80) |
| Iphoyinti le-Flash | 28 | 38 | 32 |
| Isho esitsheni | Ngemuva kokugqugquzela, akukho khekhe, okubonisa isimo esifanayo | Ngemuva kokugqugquzela, akukho khekhe, okubonisa isimo esifanayo | Ngemuva kokugqugquzela, akukho khekhe, okubonisa isimo esifanayo |
| Ukwakhiwa | Abukho ubunzima ekufutheni | Abukho ubunzima ekufutheni | Abukho ubunzima ekufutheni |
| I-nozzle orifice (mm) | 1.5-2.0 | 1.5-2.0 | 1.5-2.0 |
| Ukucindezela kweNozzle (Mpa) | 0.1-0.2 | 0.1-0.2 | 0.1-0.2 |
| Ukumelana namanzi (96h) | Okuvamile | Okuvamile | Okuvamile |
| Ukumelana ne-Acid (48h) | Okuvamile | Okuvamile | Okuvamile |
| Ukumelana ne-alkali (48h) | Okuvamile | Okuvamile | Okuvamile |
| Ukumelana nokuphuzi (168h) | ≤3.0 | ≤3.0 | ≤3.0 |
| Ukugeza ukumelana | 2000 izikhathi | 2000 izikhathi | 2000 izikhathi |
| Ukumelana ne-Tarnish /% | ≤15 | ≤15 | ≤20 |
| Impilo yesevisi | > iminyaka eyi-10 | > iminyaka eyi-10 | > iminyaka eyi-10 |
| Isikhathi sokugcina | 1 unyaka | 1 unyaka | 1 unyaka |
| Penda imibala | Imibala eminingi | Imibala eminingi | Okusobala |
| Indlela yokufaka isicelo | Irola, Ibhulashi noma Isifutho | Irola, Ibhulashi noma Isifutho | Irola, Ibhulashi noma Isifutho |
| Isitoreji | 5-30 ℃, epholile, eyomile | 5-30 ℃, epholile, eyomile | 5-30 ℃, epholile, eyomile |
Imihlahlandlela yohlelo lokusebenza
I-substrate ephekwe ngaphambilini
Isiqalo
Koqweqwe lwawo oluphezulu lwe-Coating
I-varnish (uyazikhethela)
| IsiceloUbubanzi | |
| Ifanele ukuvikelwa kwendawo yensimbi yangaphakathi nangaphandle, njengesakhiwo sensimbi sepayipi, ifenisha yensimbi, olwandle, imboni yezokwakha, imboni kagesi, imboni yezinsimbi njll. | |
| Iphakheji | |
| 20kg / umgqomo kanye 6kg / umgqomo. | |
| Isitoreji | |
| Lo mkhiqizo ugcinwe endaweni engaphezu kuka-0 ℃, indawo yokukhipha umoya kahle, enomthunzi nendawo epholile. |
Umyalelo Wohlelo
Imibandela Yokwakha
Ubuso kufanele buphucuzeke, bulungiswe, buqoqwe uthuli ngokuya ngesimo esiyisisekelo sendawo;Ukulungiswa kahle kwe-substrate kubalulekile ekusebenzeni kahle.Ubuso kufanele bube nomsindo, buhlanzeke, bome futhi bungabi nezinhlayiya ezixegayo, uwoyela, amafutha, nokunye ukungcola.
Isinyathelo Sokufaka Isicelo
Isiqalo:
1) Hlanganisa ( A )I-Primer, ( B ) i-ejenti yokwelapha futhi ( C ) izacile emgqonyeni ngokwesilinganiso ngesisindo;
2) Hlanganisa ngokugcwele futhi ugovuze emizuzwini engu-4-5 kuze kube yilapho ungenawo amabhamuza alinganayo, qinisekisa ukuthi upende lunyakaziswa ngokuphelele.Inhloso eyinhloko yale primer ukufinyelela i-anti-water, futhi uvale i-substrate ngokuphelele futhi ugweme ama-bubbles emoyeni emzimbeni womzimba;
3) Ukusetshenziswa kwereferensi ngu-0.15kg/m2.Ukugingqa, ukuxubha noma ukufafaza i-primer ngokulinganayo (njengoba kukhombisa isithombe esinamathiselwe) isikhathi esingu-1;
4) Linda ngemva kwamahora angu-24, isinyathelo esilandelayo sokufaka isicelo sokugqoka i-koqweqwe lwawo phezulu;
5) Ngemva kwamahora angu-24, ngokwesimo sendawo, ukupholisha kungenziwa, lokhu ngokuzikhethela;
6) Ukuhlola: qinisekisa ukuthi ifilimu kapende ilingana nombala ofanayo, ngaphandle kokumboza.
I-Enamel Top Coating:
1) Hlanganisa ( A ) uqweqwe olungaphezulu koqweqwe lwawo, ( B ) i-ejenti yokwelapha futhi ( C ) mncane emgqonyeni ngokwesilinganiso ngesisindo;
2) Hlanganisa ngokugcwele futhi ugovuze ku-4-5 min kuze kube yilapho ungenayo ama-bubbles alinganayo, qinisekisa ukuthi upende lunyakaziswa ngokugcwele;
3) Ukusetshenziswa kwereferensi ngu-0.25kg/m2.Ukugingqa, ukuxubha noma ukufafaza i-primer ngokulinganayo (njengoba kukhombisa isithombe esinamathiselwe) isikhathi esingu-1;
4) Ukuhlola: qinisekisa ukuthi ifilimu kapende ilingana nombala ofanayo, ngaphandle komgodi.
Amanothi:
1) Upende wokuxuba kufanele usetshenziswe kungakapheli imizuzu engama-20;
2) Gcina isonto elingu-1, lingasetshenziswa lapho upende uqinile ngokuphelele;
3) Ukuvikelwa kwefilimu: gwema ukunyathela, imvula, ukubeka ukukhanya kwelanga nokunwaya kuze kube yilapho ifilimu isomile ngokuphelele futhi iqina.
