Imikhiqizo
Upende olunemibala yemabula odongeni olunamaholoholo
Imabula ukuthungwa ngopende
Ngaphambili
Reverse
Imingcele Yezobuchwepheshe
| Isiqalo | I-Marble Texture Top Coating | I-varnish (uyazikhethela) | |
| Impahla | I-solvent free (Isekelwe emanzini) | I-solvent free (Isekelwe emanzini) | I-solvent free (Isekelwe emanzini) |
| Ugqinsi lwefilimu elomile | 50μm-80μm/ungqimba | 1mm-2mm/ungqimba | 50μm-80μm/ungqimba |
| Ukusabalala kwetiyori | 0.15 kg/㎡ | 1.2 kg/㎡ | 0.12 kg/㎡ |
| Thinta ome | ＜2h (25℃) | ＜6h (25℃) | ＜2h (25℃) |
| Isikhathi sokumisa (kanzima) | Amahora angu-24 | Amahora angu-24 | Amahora angu-24 |
| Ivolumu eqinile % | 60 | 80 | 65 |
| Imikhawulo yohlelo lokusebenza Okuncane.Temp.Ubukhulu.RH% | (-10) ~ (80) | (-10) ~ (80) | (-10) ~ (80) |
| Isho esitsheni | Ngemuva kokugqugquzela, akukho khekhe, okubonisa isimo esifanayo | Ngemuva kokugqugquzela, akukho khekhe, okubonisa isimo esifanayo | Ngemuva kokugqugquzela, akukho khekhe, okubonisa isimo esifanayo |
| Ukwakhiwa | Abukho ubunzima ekufutheni | Abukho ubunzima ekufutheni | Abukho ubunzima ekufutheni |
| I-nozzle orifice (mm) | 1.5-2.0 | 5-5.5 | 1.5-2.0 |
| Ukucindezela kweNozzle (Mpa) | 0.2-0.5 | 0.5-0.8 | 0.1-0.2 |
| Ukumelana namanzi (96h) | Okuvamile | Okuvamile | Okuvamile |
| Ukumelana ne-Acid (48h) | Okuvamile | Okuvamile | Okuvamile |
| Ukumelana ne-alkali (48h) | Okuvamile | Okuvamile | Okuvamile |
| Ukumelana nokuphuzi (168h) | ≤3.0 | ≤3.0 | ≤3.0 |
| Ukugeza ukumelana | 3000 izikhathi | 3000 izikhathi | 3000 izikhathi |
| Ukumelana ne-Tarnish /% | ≤15 | ≤15 | ≤15 |
| Ukuxuba isilinganiso samanzi | 5%-10% | 5%-10% | 5%-10% |
| Impilo yesevisi | > iminyaka engu-15 | > iminyaka engu-15 | > iminyaka engu-15 |
| Isikhathi sokugcina | 1 unyaka | 1 unyaka | 1 unyaka |
| Coatings imibala | Imibala eminingi | Imibala eminingi | Okusobala |
| Indlela yokufaka isicelo | I-Roller noma i-spray | I-Roller noma i-spray | I-Roller noma i-spray |
| Isitoreji | 5-30 ℃, epholile, eyomile | 5-30 ℃, epholile, eyomile | 5-30 ℃, epholile, eyomile |
Imihlahlandlela yohlelo lokusebenza
I-substrate ephekwe ngaphambilini
Isigcwalisi (ongakukhetha)
Isiqalo
I-Marble texture top coating
I-varnish (uyazikhethela)
| Isicelo | |
| Ifanele isakhiwo sezentengiselwano, isakhiwo somphakathi, ihhovisi, ihhotela, isikole, isibhedlela , amafulethi, i-villa kanye nezinye izindonga zangaphandle nezingaphakathi zokuhlobisa umphezulu kanye nokuvikelwa. | |
| Iphakheji | |
| 20kg/umgqomo. | |
| Isitoreji | |
| Lo mkhiqizo ugcinwe endaweni engaphezu kuka-0 ℃, indawo yokukhipha umoya kahle, enomthunzi nendawo epholile. |
Umyalelo Wohlelo
Imibandela Yokwakha
Izimo zokwakha akufanele zibe ngenkathi yomswakama kanye nesimo sezulu esibandayo (izinga lokushisa ≥10℃ futhi umswakama ngu-≤85%).Isikhathi esingezansi sokufaka isicelo sisho izinga lokushisa elijwayelekile ku-25℃.
Isinyathelo Sokufaka Isicelo
Ukulungiswa kwendawo:
Kufanele kufakwe isihlabathi, kulungiswe, kuqoqwe uthuli ngokuya ngesimo esiyisisekelo sesayithi;Ukulungiswa kahle kwe-substrate kubalulekile ekusebenzeni kahle.Ubuso kufanele bube nomsindo, buhlanzeke, bome futhi bungabi nezinhlayiya ezixegayo, uwoyela, amafutha, nokunye ukungcola.
Isiqalo :
I-1) Hlanganisa i-primer emgqonyeni (Ngemva kwesikhathi eside sokuthutha, upende luyoba nesimo sokubeka, ngakho-ke esembozweni somgqomo ovulekile ngemuva kwesidingo sokugubha), hlanganisa ngokugcwele bese ugoqa emaminithini angu-2-3 kuze kube ngaphandle kwama-bubbles alinganayo;
I-2) I-primer rolling ngokulinganayo nge-roller yezinwele ezinde ngesikhathi esingu-1 (njengoba isithombe esinamathiselwe sibonisa) .Inhloso eyinhloko yale primer ukuvala i-substrate ngokuphelele futhi ugweme ama-bubbles emoyeni ejazini lomzimba.Ngokwesimo sokumuncwa kwe-substrate, ijazi lesibili lingadingeka;
3) amahora angu-24 kamuva omile kanzima (emazingeni okushisa ajwayelekile angama-25 ℃);
4) Izinga lokuhlola le-primer: ngisho nefilimu enokukhanya okuthile.
I-Marble texture top coating :
I-1) Hlanganisa i-marble texture top coating emgqonyeni, uhlanganise ngokugcwele bese ugoqa emaminithini angu-2-3 kuze kube ngaphandle kwamabhamuza alinganayo;
2) Ukufafaza ukugqoka okuphezulu ngokulinganayo ngesibhamu sokufafaza ngesikhathi esingu-1 (njengoba kukhombisa isithombe esinamathiselwe);
3) amahora angu-24 kamuva omile kanzima (emazingeni okushisa ajwayelekile angama-25 ℃);
4) Izinga lokuhlola ijazi eliphezulu: Alinamatheli esandleni, alithambeki, alinambhalo wezinzipho uma unwaya indawo;
5) Imibala efanayo futhi ngaphandle komgodi.
Izixwayiso
Qiniseka ukuthi uthatha izinyathelo zokuphepha ngaphambi kokuqala le phrojekthi.Sebenza endaweni enomoya omuhle, futhi ugqoke amagilavu, imaski kanye nezibuko zokuphepha ukuze ugweme ukucasuka kwesikhumba, ukuphefumula nokucasuka kwamehlo.
Hlanza
Ngemuva kwejazi ngalinye, kubalulekile ukuhlanza amathuluzi akho nendawo yokusebenza.Susa upende owedlulele nge-scraper futhi uhlanze amabhulashi akho ne-roller ngensipho namanzi.
Amanothi
Kubalulekile ukuba nochwepheshe onolwazi lokusingatha le phrojekthi.Uchwepheshe angaqinisekisa ukuphepha nokuqedwa ngesikhathi kwephrojekthi.Kumelwe futhi uqinisekise ukuthi unopende owanele ukumboza zonke izindonga ohlela ukuzelapha.Ukuntuleka kopende kungadala ukuhlukahluka kombala, okuholela kumphumela ongalingani.
ukwakhiwa kwephrojekthi yepende yodonga lokuthungwa kwemabula kudinga ubuchwepheshe, isineke, nokunaka imininingwane.Ukuze uthole imiphumela engcono kakhulu, qiniseka ukuthi unamathuluzi afanele, landela izinqubo ezifanele, futhi uthathe izinyathelo zokuphepha ezifanele.Xhumana nochwepheshe ngaphambi kokuqala le phrojekthi, futhi uqiniseke ukuthi unopende owanele ukuze uqedele iphrojekthi.Ngaso sonke isikhathi khumbula ukugqoka amagiya okuzivikela, usebenze endaweni ekhanyiswe kahle nengena umoya, futhi uhlanze indawo yakho yokusebenza ngemva kwejazi ngalinye likapende.
